Initial commit

default/avahi-daemon

@@ -0,0 +1,4 @@
+# 1 = Try to detect unicast dns servers that serve .local and disable avahi in
+# that case, 0 = Don't try to detect .local unicast dns servers, can cause
+# troubles on misconfigured networks
+AVAHI_DAEMON_DETECT_LOCAL=1

default/bluetooth

@@ -0,0 +1,20 @@
+# Defaults for bluez
+
+# start bluetooth on boot?
+# compatibility note: if this variable is _not_ found bluetooth will start
+BLUETOOTH_ENABLED=1
+
+# This setting used to switch HID devices (e.g mouse/keyboad) to HCI mode, that
+# is you will have bluetooth functionality from your dongle instead of only
+# HID. This is accomplished for supported devices by udev in
+# /lib/udev/rules.d/62-bluez-hid2hci.rules by invoking hid2hci with correct
+# parameters.
+# See /usr/share/doc/bluez/NEWS.Debian.gz for further information.
+
+# Older daemons like pand dund and hidd can be found in bluez-compat package as
+# they are deprecated and provided for backward compatibility only.
+
+# Note that not every bluetooth dongle is capable of switching back to HID mode,
+# see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=355497
+HID2HCI_ENABLED=0
+HID2HCI_UNDO=0

default/bsdmainutils

@@ -0,0 +1,4 @@
+# Uncomment the following line if you'd like all of your users'
+# ~/calendar files to be checked daily.  Calendar will send them mail
+# to remind them of upcoming events.  See calendar(1) for more details.
+#RUN_DAILY=true

default/console-setup

@@ -0,0 +1,16 @@
+# CONFIGURATION FILE FOR SETUPCON
+
+# Consult the console-setup(5) manual page.
+
+ACTIVE_CONSOLES="/dev/tty[1-6]"
+
+CHARMAP="UTF-8"
+
+CODESET="guess"
+FONTFACE=""
+FONTSIZE=""
+
+VIDEOMODE=
+
+# The following is an example how to use a braille font
+# FONT='lat9w-08.psf.gz brl-8x8.psf'

default/crda

@@ -0,0 +1,11 @@
+# Set REGDOMAIN to a ISO/IEC 3166-1 alpha2 country code so that iw(8) may set
+# the initial regulatory domain setting for IEEE 802.11 devices which operate
+# on this system.
+#
+# Governments assert the right to regulate usage of radio spectrum within
+# their respective territories so make sure you select a ISO/IEC 3166-1 alpha2
+# country code suitable for your location or you may infringe on local
+# legislature. See `/usr/share/zoneinfo/zone.tab' for a table of timezone
+# descriptions containing ISO/IEC 3166-1 alpha2 country codes.
+
+REGDOMAIN=

default/cron

@@ -0,0 +1,28 @@
+# Cron configuration options
+
+# Whether to read the system's default environment files (if present)
+# If set to "yes", cron will set a proper mail charset from the
+# locale information. If set to something other than 'yes', the default
+# charset 'C' (canonical name: ANSI_X3.4-1968) will be used.
+#
+# This has no effect on tasks running under cron; their environment can
+# only be changed via PAM or from within the crontab; see crontab(5).
+READ_ENV="yes"
+
+# Extra options for cron, see cron(8)
+#
+# For example, to enable LSB name support in /etc/cron.d/, use
+# EXTRA_OPTS='-l'  
+#
+# Or, to log standard messages, plus jobs with exit status != 0:
+# EXTRA_OPTS='-L 5'
+#
+# For quick reference, the currently available log levels are:
+#   0   no logging (errors are logged regardless)
+#   1   log start of jobs
+#   2   log end of jobs
+#   4   log jobs with exit status != 0
+#   8   log the process identifier of child process (in all logs)
+#
+#EXTRA_OPTS=""
+

default/dbus

@@ -0,0 +1,7 @@
+# This is a configuration file for /etc/init.d/dbus; it allows you to
+# perform common modifications to the behavior of the dbus daemon
+# startup without editing the init script (and thus getting prompted
+# by dpkg on upgrades).  We all love dpkg prompts.
+
+# Parameters to pass to dbus.
+PARAMS=""

default/fake-hwclock

@@ -0,0 +1,2 @@
+# Uncomment to set clock even if saved value appears to be in the past
+#FORCE=force

default/hwclock

@@ -0,0 +1,19 @@
+# Defaults for the hwclock init script.  See hwclock(5) and hwclock(8).
+
+# This is used to specify that the hardware clock incapable of storing
+# years outside the range of 1994-1999.  Set to yes if the hardware is
+# broken or no if working correctly.
+#BADYEAR=no
+
+# Set this to yes if it is possible to access the hardware clock,
+# or no if it is not.
+#HWCLOCKACCESS=yes
+
+# Set this to any options you might need to give to hwclock, such
+# as machine hardware clock type for Alphas.
+#HWCLOCKPARS=
+
+# Set this to the hardware clock device you want to use, it should
+# probably match the CONFIG_RTC_HCTOSYS_DEVICE kernel config option.
+#HCTOSYS_DEVICE=rtc0
+

default/keyboard

@@ -0,0 +1,10 @@
+# KEYBOARD CONFIGURATION FILE
+
+# Consult the keyboard(5) manual page.
+
+XKBMODEL="pc105"
+XKBLAYOUT="gb"
+XKBVARIANT=""
+XKBOPTIONS=""
+
+BACKSPACE="guess"

default/locale

@@ -0,0 +1,2 @@
+#  File generated by update-locale
+LANG=en_GB.UTF-8

default/networking

@@ -0,0 +1,31 @@
+# Configuration for networking init script being run during
+# the boot sequence
+
+# Set to 'no' to skip interfaces configuration on boot
+#CONFIGURE_INTERFACES=yes
+
+# Don't configure these interfaces. Shell wildcards supported/
+#EXCLUDE_INTERFACES=
+
+# Set to 'yes' to enable additional verbosity
+#VERBOSE=no
+
+# Method to wait for the network to become online,
+# for services that depend on a working network:
+# - ifup: wait for ifup to have configured an interface.
+# - route: wait for a route to a given address to appear.
+# - ping/ping6: wait for a host to respond to ping packets.
+# - none: don't wait.
+#WAIT_ONLINE_METHOD=ifup
+
+# Which interface to wait for.
+# If none given, wait for all auto interfaces, or if there are none,
+# wait for at least one hotplug interface.
+#WAIT_ONLINE_IFACE=
+
+# Which address to wait for for route, ping and ping6 methods.
+# If none is given for route, it waits for a default gateway.
+#WAIT_ONLINE_ADDRESS=
+
+# Timeout in seconds for waiting for the network to come online.
+#WAIT_ONLINE_TIMEOUT=300

default/nfs-common

@@ -0,0 +1,19 @@
+# If you do not set values for the NEED_ options, they will be attempted
+# autodetected; this should be sufficient for most people. Valid alternatives
+# for the NEED_ options are "yes" and "no".
+
+# Do you want to start the statd daemon? It is not needed for NFSv4.
+NEED_STATD=
+
+# Options for rpc.statd.
+#   Should rpc.statd listen on a specific port? This is especially useful
+#   when you have a port-based firewall. To use a fixed port, set this
+#   this variable to a statd argument like: "--port 4000 --outgoing-port 4001".
+#   For more information, see rpc.statd(8) or http://wiki.debian.org/SecuringNFS
+STATDOPTS=
+
+# Do you want to start the idmapd daemon? It is only needed for NFSv4.
+NEED_IDMAPD=
+
+# Do you want to start the gssd daemon? It is required for Kerberos mounts.
+NEED_GSSD=

default/nss

@@ -0,0 +1,37 @@
+# /etc/default/nss
+# This file can theoretically contain a bunch of customization variables
+# for Name Service Switch in the GNU C library.  For now there are only
+# four variables:
+#
+# NETID_AUTHORITATIVE
+#   If set to TRUE, the initgroups() function will accept the information
+#   from the netid.byname NIS map as authoritative.  This can speed up the
+#   function significantly if the group.byname map is large.  The content
+#   of the netid.byname map is used AS IS.  The system administrator has
+#   to make sure it is correctly generated.
+#NETID_AUTHORITATIVE=TRUE
+#
+# SERVICES_AUTHORITATIVE
+#   If set to TRUE, the getservbyname{,_r}() function will assume
+#   services.byservicename NIS map exists and is authoritative, particularly
+#   that it contains both keys with /proto and without /proto for both
+#   primary service names and service aliases.  The system administrator
+#   has to make sure it is correctly generated.
+#SERVICES_AUTHORITATIVE=TRUE
+#
+# SETENT_BATCH_READ
+#  If set to TRUE, various setXXent() functions will read the entire
+#  database at once and then hand out the requests one by one from
+#  memory with every getXXent() call.  Otherwise each getXXent() call
+#  might result into a network communication with the server to get
+#  the next entry.
+#SETENT_BATCH_READ=TRUE
+#
+# ADJUNCT_AS_SHADOW
+#  If set to TRUE, the passwd routines in the NIS NSS module will not
+#  use the passwd.adjunct.byname tables to fill in the password data
+#  in the passwd structure.  This is a security problem if the NIS
+#  server cannot be trusted to send the passwd.adjuct table only to
+#  privileged clients.  Instead the passwd.adjunct.byname table is
+#  used to synthesize the shadow.byname table if it does not exist.
+ADJUNCT_AS_SHADOW=TRUE

default/raspberrypi-kernel

@@ -0,0 +1,11 @@
+# Defaults for raspberrypi-kernel
+
+# Uncomment the following line to enable generation of
+# /boot/initrd.img-KVER files (requires initramfs-tools)
+
+#INITRD=Yes
+
+# Uncomment the following line to enable generation of
+# /boot/initrd(7).img files (requires rpi-initramfs-tools)
+
+#RPI_INITRD=Yes

default/rng-tools

@@ -0,0 +1,17 @@
+# Configuration for the rng-tools initscript
+# $Id: rng-tools.default,v 1.1.2.5 2008-06-10 19:51:37 hmh Exp $
+
+# This is a POSIX shell fragment
+
+# Set to the input source for random data, leave undefined
+# for the initscript to attempt auto-detection.  Set to /dev/null
+# for the viapadlock driver.
+#HRNGDEVICE=/dev/hwrng
+#HRNGDEVICE=/dev/null
+
+# Additional options to send to rngd. See the rngd(8) manpage for
+# more information.  Do not specify -r/--rng-device here, use
+# HRNGDEVICE for that instead.
+#RNGDOPTIONS="--hrng=intelfwh --fill-watermark=90% --feed-interval=1"
+#RNGDOPTIONS="--hrng=viakernel --fill-watermark=90% --feed-interval=1"
+#RNGDOPTIONS="--hrng=viapadlock --fill-watermark=90% --feed-interval=1"

default/rpi-eeprom-update

@@ -0,0 +1 @@
+FIRMWARE_RELEASE_STATUS="default"

default/rsync

@@ -0,0 +1,47 @@
+# defaults file for rsync daemon mode
+#
+# This file is only used for init.d based systems!
+# If this system uses systemd, you can specify options etc. for rsync
+# in daemon mode by copying /lib/systemd/system/rsync.service to
+# /etc/systemd/system/rsync.service and modifying the copy; add required
+# options to the ExecStart line.
+
+# start rsync in daemon mode from init.d script?
+#  only allowed values are "true", "false", and "inetd"
+#  Use "inetd" if you want to start the rsyncd from inetd,
+#  all this does is prevent the init.d script from printing a message
+#  about not starting rsyncd (you still need to modify inetd's config yourself).
+RSYNC_ENABLE=false
+
+# which file should be used as the configuration file for rsync.
+# This file is used instead of the default /etc/rsyncd.conf
+# Warning: This option has no effect if the daemon is accessed
+#          using a remote shell. When using a different file for
+#          rsync you might want to symlink /etc/rsyncd.conf to
+#          that file.
+# RSYNC_CONFIG_FILE=
+
+# what extra options to give rsync --daemon?
+#  that excludes the --daemon; that's always done in the init.d script
+#  Possibilities are:
+#   --address=123.45.67.89		(bind to a specific IP address)
+#   --port=8730				(bind to specified port; default 873)
+RSYNC_OPTS=''
+
+# run rsyncd at a nice level?
+#  the rsync daemon can impact performance due to much I/O and CPU usage,
+#  so you may want to run it at a nicer priority than the default priority.
+#  Allowed values are 0 - 19 inclusive; 10 is a reasonable value.
+RSYNC_NICE=''
+
+# run rsyncd with ionice?
+#  "ionice" does for IO load what "nice" does for CPU load.
+#  As rsync is often used for backups which aren't all that time-critical,
+#  reducing the rsync IO priority will benefit the rest of the system.
+#  See the manpage for ionice for allowed options.
+#  -c3 is recommended, this will run rsync IO at "idle" priority. Uncomment
+#  the next line to activate this.
+# RSYNC_IONICE='-c3'
+
+# Don't forget to create an appropriate config file,
+# else the daemon will not start.

default/rsyslog

@@ -0,0 +1,4 @@
+# Options for rsyslogd
+# -x disables DNS lookups for remote messages
+# See rsyslogd(8) for more details
+RSYSLOGD_OPTIONS=""

default/ssh

@@ -0,0 +1,5 @@
+# Default settings for openssh-server. This file is sourced by /bin/sh from
+# /etc/init.d/ssh.
+
+# Options to pass to sshd
+SSHD_OPTS=

default/triggerhappy

@@ -0,0 +1,17 @@
+# Defaults for triggerhappy initscript
+# sourced by /etc/init.d/triggerhappy
+# installed at /etc/default/triggerhappy by the maintainer scripts
+
+#
+# This is a POSIX shell fragment
+#
+
+# Additional options that are passed to the Daemon.
+DAEMON_OPTS=""
+
+# The Triggerhappy daemon (thd) drops its root privileges after
+# startup and becomes "nobody". If you want it to retain its root
+# status (e.g. to run commands only accessible to the system user),
+# uncomment the following line or specifiy the user option yourself:
+#
+# DAEMON_OPTS="--user root"

default/useradd

@@ -0,0 +1,37 @@
+# Default values for useradd(8)
+#
+# The SHELL variable specifies the default login shell on your
+# system.
+# Similar to DHSELL in adduser. However, we use "sh" here because
+# useradd is a low level utility and should be as general
+# as possible
+SHELL=/bin/bash
+#
+# The default group for users
+# 100=users on Debian systems
+# Same as USERS_GID in adduser
+# This argument is used when the -n flag is specified.
+# The default behavior (when -n and -g are not specified) is to create a
+# primary user group with the same name as the user being added to the
+# system.
+# GROUP=100
+#
+# The default home directory. Same as DHOME for adduser
+# HOME=/home
+#
+# The number of days after a password expires until the account 
+# is permanently disabled
+# INACTIVE=-1
+#
+# The default expire date
+# EXPIRE=
+#
+# The SKEL variable specifies the directory containing "skeletal" user
+# files; in other words, files such as a sample .profile that will be
+# copied to the new user's home directory when it is created.
+SKEL=/etc/skel
+#
+# Defines whether the mail spool should be created while
+# creating the account
+# CREATE_MAIL_SPOOL=yes
+